In general, learning how to hem pants remains a useful skill. Whether your harem pants are too short or too long, you can adjust them yourself. The question is, what materials do you need and what methods should you use: simple, glued, or machine-sewn, etc.?.
Discover, with O Sarouel, the different ways to adjust your harem pants.
How to hem pants: but what is a hem?
To know how to hem pants, it's good to know what it really is. In fact, in sewing, hemming (or cuffing or folding) is the action of turning over a small section of fabric. Then sewing it to prevent the fabric from fraying.
In other words, it is a type of finish on the edge of the fabric. Whether it is a T-shirt or the legs of a pair of pants, it is a type of finish that is used to prevent fraying. men's harem pants For example, this technique can be useful for performing a shortening procedure.
Also, since there is no need to cut the garment, this makes it possible to make alterations such as lengthening it. In addition to being very practical, it has the advantage of keeping the fabric intact for a very long time.
How to hem pants: the necessary equipment
Before you begin, gather the necessary materials:
- First, you will need a tape measure or sewing ruler, pins, and needles. ;
- Next, get some thread, chalk, scissors, and an iron. ;
- Finally, depending on the technique used, you will need a sewing machine, but you can easily do without it.
There you go! Your equipment is ready to start sewing!
How to hem pants: a few types of hems
To tell the truth, there are different techniques to use depending on the type of garment or fabric. However, we will focus on techniques suitable for shortening seroual pants.
The single reverse
First of all, a simple hem is an easy technique that involves overcasting the edge of a piece of fabric. You can choose to do this either by machine or by hand.
So, to do this, you will fold the edge inside the garment, leaving a margin. This margin should not exceed one or two centimeters and should be sewn to the fabric. And there you have it! Your first adjustment is done! It's crazy, isn't it?
The glued reverse side
So, this method is ideal for those who don't want to worry about it! With this method, you don't need to stitches. The technique?
- First, simply place a strip of iron-on tape over the edge you want to shorten to hold it in place. These iron-on tapes are available at all haberdashery stores.
- To achieve the best results with this technique, make sure that the tape is firmly stuck to a straight edge of the fabric. Otherwise, the tape may come unstuck.
- Finally, if you want a neat finish, it is advisable to use bias binding. Bias binding is a narrow strip of fabric that is sewn along the edge or fold of the fabric.
Precautions before you start...
Before you start, make sure you take the correct measurements of your harem pants. It would be a shame to make the pleats too big and then have to start all over again.